YIWU ZEYOU HARDWARE FACTORY
National consultation hotline 15267993692

How to distinguish the hardness and wear resistance of mechanical parts?

Classification：行业动态
Release time：2019-12-31
Share to:
Hardness is the basic characteristics of tooth -shaped blade materials. the tooth -shaped blade should cut off the dandruff from the workpiece, and its hardness must be greater than the hardness of the workpiece material. the hardness of the cutting blade of the tooth -shaped blade used for dandruff metal is generally above 60hrc. abrasion resistance is the ability to resist wear. generally speaking, the higher the hardness of the tooth -shaped blade material.
Previous: The development trend of the pre -adjustment instrument in 2017 starts from these three aspects Next: None
More recommendations
How does decorative hardware and functional hardware achieve great integration?2019-12-31
After more than ten years of development, the development of domestic furniture and hardware has become better and better, and hardware accessories have become indispensable among furniture. modern furniture products pay more attention to the combination of fashion and functionality, and the hardware in the tools also pay attention to the fusion of decorative and functional.
Aluminum doors and windows hardware industry: what is a strong source of enterprises?2019-12-31
In fact, the rules or authoritative institutions that can really evaluate the rankings are not necessarily that this manufacturer or company is really a leader in the industry or has such strength. market feedback, quality guarantee, after -sales service, and market recognition are the reflection of true strength.
The development trend of the pre -adjustment instrument in 2017 starts from these three aspects2019-12-31
The pre -adjustment instrument of the tool is a measurement device that can be adjusted and measuring the diameter of the knife tip, the length of the clip, and can input the knife data input processing center nc program. with the popularization of nc machine tools equipped with multi -knife automatic knife devices, the market with high accuracy and high -efficiency knives is continuously expanding.
How to distinguish the hardness and wear resistance of mechanical parts?2019-12-31
Hardness is the basic characteristics of tooth -shaped blade materials. the tooth -shaped blade should cut off the dandruff from the workpiece, and its hardness must be greater than the hardness of the workpiece material. the hardness of the cutting blade of the tooth -shaped blade used for dandruff metal is generally above 60hrc. abrasion resistance is the ability to resist wear. generally speaking, the higher the hardness of the tooth -shaped blade material.
YIWU ZEYOU HARDWARE FACTORY

YIWU ZEYOU HARDWARE FACTORY

YIWU ZEYOU HARDWARE FACTORY was established in 2023

Contact information

  • Telephone：15267993692
  • Email：2881725076@qq.com
  • Address：First floor, Unit 3, Building 37,Xiwangjie Village, Chojiang Street, YiwCity, zhejiang Province
  • Cell phone：15267993692
© YIWU ZEYOU HARDWARE FACTORY All rights reserved

Online service

  Telephone：15267993692

 Mail：2881725076@qq.com

Wechat has been copied
I see